AVU8011A, Line-Powered Extender Kit - DVI over CATx

Store home > Audio Video > Video Extenders > DVI > Line-Powered Extender Kit - DVI over CATx

Photo may vary from actual product		Line-Powered Extender Kit - DVI over CATx Extend DVI video to remote displays over one shielded CATx cable. Easy-to-install, plug-and-play system gets you connected right away. The uncompressed communication system allows for crisp, digital video delivery with resolutions up to 1920x1200 at 60Hz. Reach up to 50m over a single shielded CATx cable. Smart EDID management keeps aspect ratios and resolutions intact indiscriminate of display type. This ensures the correct content is displayed. Durable locking connectors to ensure strong connectivity. Built to last and selected for reliability, durability, and performance. Warranty: 3 Year Double Diamond™ Warranty (Standard)

	Product				Code		Unit price		Quantity

(1) Single link DVI-D

50m

Extender Kit

Line-Powered Extender Kit - DVI over CATx

AVU8011A

Add to shopping basket

Technical data

Package content

Approvals — CE, FCC, RoHS2
Connectors—
Transmitter: DVI-D male, USB type A (for power only);
Receiver: DVI-D male
Distance and resolution — 50 m (164 ft.) at 1920 x 1200
Hardware Compatibility— All computers with DVI-D and USB connections - requirement dependent
DVI-D interface— The system supports resolutions such as 480p, 720p, 1080p, or WUXGA (1920x1200) at 60Hz* and 24 bit color depth. *with reduced blanking
Operating Temperature — 0 to 40°C (32 to 104°F)
Power — USB powered, 5VDC -2.5W for both RX and TX units combined
Dimensions —
2H x 6.4D x 4.6W cm (0.8"H x 2.5"D x 1.8"W)
Pigtails: 30 cm L (12")
Weight — 0.27 kg (0.6 lb) per pair

NOTES: Category 6 (or better) shielded twisted pair cable must be used to connect the local and remote units in order to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level if immunity to electromagnetic disturbances.

Distances are achieved using simple lengths of trunk/bulk cable. For each break/patch connection reduce distance by 5 m. Preferably patch cables should be of type CAT7 and less than 2 m. Patch cables over 2 m must be CAT7.

Do not connect the local units, via the catx cable, to anything other than the remote unit.